H3C S6520X-HI Series Advanced Aggregation 10GE Switches

          HomeProducts & TechnologyEnterprise ProductsSwitchesH3C S6520X-HI Series Advanced Aggregation 10GE Switches
          S6520X-54HC-HI/S6520X-54QC-HI
          S6520X-54HC-HI/S6520X-54QC-HI
          S6520X-30HC-HI/S6520X-30QC-HI
          S6520X-30HC-HI/S6520X-30QC-HI

          H3C S6520X-HI Switch Series ­—Industry-leading high performance and scalable Layer 3+ 10GE access switching solution with modular dual power, fixed or modular uplinks (10GbE/40GbE/100GbE) and IRF for resiliency. The series offers OSPF/BGP and multicast, SDN enabled and flexible management.

          The S6520X-HI switch series contains the following models:

          H3C S6520X-54HC–HI—provides 48 × 1/10G SFP+ ports, 2 × QSFP28 ports(100G, can be split into four 25GE ports), 2 × expansion slots, 2 × fan tray slots, and 2 × power module slots

          H3C S6520X-30HC–HI—provides 24 × 1/10G SFP+ ports, 2 × QSFP28 ports(100G, can be split into four 25GE ports), 2 × expansion slots, 2 × fan tray slots, and 2 × power module slots

          H3C S6520X-54QC–HI—provides 48 × 1/10G SFP+ ports, 2 × QSFP+ ports (40GE, can be split into four 10GE ports.), 2 × expansion slots, 2 × fan tray slots, and 2 × power module slots

          H3C S6520X-30QC–HI—provides 24 × 1/10G SFP+ ports, 2 × QSFP+ ports (40GE, can be split into four 10GE ports.), 2 × expansion slots, 2 × fan tray slots, and 2 × power module slots

          Open application architecture

          In H3C open application architecture (OAA), the switch can accommodate high-performance OAP modules to offer dedicated services such as firewall, IPS, or load balancing in addition to conventional forwarding services. By installing OAP modules, the customers can use the switch as a multiservice device without having to buy separate service appliances, such as a firewall device.

          High-density 10GE forwarding

          The switch offers high-density 10GE forwarding and can expand 10GE ports flexibly. It provides 48/24*10/1GE autosensing SFP+ ports, two QSFP28 or QSFP+ ports onboard, and two expansion slots that support up to 11 kinds of modules range from GE to 10GE, 25GE, 40GE,100GE and Multi-giga ports. Using a QSFP+ to SFP+ splitter cable, you can split a QSFP+ port into four line-rate 10GE SFP+ ports. Max 72*10GE supported on one single switch.

          Embedded Access Controller

          H3C S6520X-HI implements the WLAN function by installing an AC feature pack on the main control unit, thereby implementing both the wired function and the WLAN function on a single device. Embedded AC is a low-cost WLAN solution, save overall investment, improve forwarding capacity, realized a true unified wired and wireless solution in Campus. Max256 AP supported on one single switches.

          H3C Intelligent Resilient Framework 2 (IRF2)

          H3C Intelligent Resilient Framework 2 (IRF 2) virtualizes multiple S6520X-HI switches into one virtual switch and provides the following benefits:

          * Scalability—IRF 2 allows you to add devices to the IRF 2 system easily. It provides a single point of management, enables switch plug-and-play, and supports software auto-update for software synchronization from the master to the new member devices. It brings business agility with lower total cost of ownership by allowing new switches to be added to the fabric without network topology change as business grows.

          * High availability—The H3C proprietary routing hot backup technology ensures redundancy and backup of all information on the control and data planes and non-stop Layer 3 data forwarding in an IRF 2 fabric. It also eliminates single point of failure and ensures service continuity.

          * Redundancy and load balancing—The distributed link aggregation technology supports load sharing and mutual backup among multiple uplinks, which enhances the network redundancy and improves link resources usage.

          * Flexibility and resiliency—The switch uses standard GE ports instead of specialized ports for IRF links between IRF member devices. This allows customers to assign bandwidth as needed between uplink, downlink, and IRF system connections. In addition, an S6520X-HI IRF fabric can span a rack, multiple racks, or multiple campuses.

          Wide range of advanced features

          The switch offers a wide range of features, including:

          * Modular hardware and software design—The switch uses modular, hot swapping, and redundancy design for hardware, including power modules and fan trays. The switch also uses modular design for software, which enables feature installation and removal on an as-needed basis. Refined physical architecture and optimized software workflows greatly reduce the end-to-end packet processing delay.

          * Software-defined networking (SDN)—An innovative network architecture that separates the control plane from the forwarding plane, typically by using OpenFlow. SDN significantly simplifies network management, reduces maintenance complexities and costs, enables flexible traffic management, and offers a good platform for network and application innovations.

          * Virtual eXtensible LAN (VXLAN)—A MAC-in-UDP technology that provides Layer 2 connectivity between distant network sites across an IP network. VXLAN enables long-distance virtual machine and data mobility and is typically used in data centers and the access layer of campus networks for multitenant services. The H3C implementation of VXLAN supports automatic VXLAN tunnel establishment with EVPN.

          * Ethernet Virtual Private Network (EVPN) is a Layer 2 VPN technology that provides both Layer 2 and Layer 3 connectivity between distant network sites across an IP network. EVPN uses MP-BGP in the control plane and VXLAN in the data plane. EVPN provides the following benefits: Configuration automation; Separation of the control plane and the data plane; Integrated routing and bridging (IRB).

          * In-Service Software Upgrade (ISSU) and Operation, Administration, and Maintenance (OAM)—Ensure business continuity and improve Ethernet management and maintainability.

          Comprehensive security control policies

          The switch supports AAA authentications (including RADIUS authentication) and dynamic or static binding of user identifiers such as user account, IP address, MAC address, VLAN, and port number.

          Using the switch in conjunction with H3C IMC, you can manage and monitor online users in real time and take prompt action on illegitimate behaviors.

          The switch offers a large number of inbound and outbound ACLs and VLAN-based ACL assignment. This simplifies configurations and saves ACL resources.

          MACsec

          MACsec is an ideal hop-by-hop link-layer security protocol for Ethernet networks, which are typically insecure. It provides the following services:

          * Data encryption—Encrypts data over the Ethernet link to protect data against security issues such as eavesdropping.

          * Anti-replay—Prevents packets from being intercepted and modified en route to protect the network against unauthorized access.

          * Tampering protection—prevents packet tampering to protect data integrity.

          * MACsec supports the following deployments:

          * Client-oriented—Protects data transmission over the link between the client and its access device.

          * Device-oriented mode—Protects data transmission over the link between two peering devices.

          The switch can cooperate with H3C iNode client and core switches such as S10500 and S7500E to provide a complete MACsec solution.

          High availability

          In addition to node and link protection, the switch offers the following hardware high availability features:

          * 1+1 power module redundancy and 1+1 fan tray redundancy.

          * Hot-swappable interface modules.

          * Automatic power and fan tray status monitoring and alarming mechanisms.

          * Automatic fan speed adjustment based on the change in temperature.

          * Self-protection mechanisms that protect power modules against overcurrent, overvoltage, and overtemperature conditions.

          Outstanding management capacity

          The switch provides a variety of management features and is easy to manage. It offers the following device management features:

          * Provides multiple management interfaces, including the console port, out-of-band management Ethernet port, and USB port.

          * Supports configuration and management from CLI or a general-purpose Web-based manager, including H3C IMC Intelligent Management Center.

          * Supports multiple access methods, including SNMPv1/v2c/v3, Telnet, and more secure SSH 2.0 and SSL.

          * Uses OAM to enhance system management capability.

          * Supports FTP for system upgrade.

          Smart Management Center (SmartMC)

          SmartMC is H3C’s latest offering and innovation that helps small and middle size enterprise network to address management issue and is free of charge, easy to use web management tool. SmartMC is embedded network management tool into the switch, it includes commander switches and other access switches.

          SmartMC delivers the following benefits:

          * Intelligent operation: once the switch is powered on and SmartMC function is enabled, topology will be created automatically and user can go enhanced web GUI to check the latest status.

          * Centralized management: all management can be achieved via commander switch such as centralized configuration backup, and software version management, increasing working efficiency.

          * One key device replacement: in case of one switch failure, the new added same type switch can download the same configuration and work as old switch immediately

          Based on DRNI architecture

          H3C S5560X-EI series switches support DRNI (Distributed Resilient Network Interconnect) cross-device interconnection aggregation technology, and realize the cross-device interconnection by virtually expanding two physical devices into one Aggregate to keep controls independent of each other, provide device-level redundancy protection and traffic load sharing, and improve system reliability.

          Technical specifications

          Item

          S6520X-54HC-HI

          S6520X-54QC-HI

          S6520X-30HC-HI

          S6520X-30QC-HI

          Port Switching capacity

          2160Gbps

          1440Gbps

          1680Gbps

          960Gbps

          Box Switching capacity

          2.56Tbps

          Packet forwarding rate

          1607Mpps

          1071Mpps

          1250Mpps

          714Mpps

          Dimensions (H × W × D)

          43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)

          Weight

          ≤ 7.5 kg (16.53 lb)

          ≤ 7.5 kg (15.43 lb)

          Flash/SDRAM

          1GB/2GB

          Console ports

          1

          Management Ethernet ports

          1

          USB ports

          1

          Micro USB ports

          1

          Service ports

          48 × 1/10GE SFP+ fiber ports

          2 × QSFP28 fiber ports (for S6520X-54HC-HI)

          2 × QSFP+ fiber ports(for S6520X-54QC-HI)

          24 × 1/10GE SFP+ fiber ports

          2 × QSFP28 fiber ports(for S6520X-30HC-HI)

          2 × QSFP+ fiber ports(for S6520X-30QC-HI)

          Expansion slots

          2

          Stacking bandwidth

          Maximum 480Gbps

          Maximum stacking num

          9

          Compatible interface modules

          8-Port 10G SFP+ Interface Module

          8-Port 10G SFP+ with MACSec Interface Module

          8-Port 1/2.5/5G BASE-T Ethernet Copper Interface Module

          8-Port 1/2.5/5/10G BASE-T Ethernet Copper Interface Module

          2-port 25GE SFP28 interface module

          2-port 40GE QSFP+ interface module

          8-port 25GE SFP28 interface module

          2-port 100GE QSFP28 interface module(for S6520X-30HC-HI and S6520X-54HC-HI)

          Input voltage range

          Rated: 100 VAC to 240 VAC @ 50 Hz/60 Hz

          Max.: 90 VAC to 264 VAC @ 47 Hz to 63 Hz

          Fan trays

          Hot swappable fan trays, invertible airflow

          Power consumption

          MIN:

          single AC: 39W; dual AC: 44W

          MAX:

          single AC: 231W; dual AC: 234W

          MIN:

          single AC: 38W; dual AC: 43W

          MAX:

          single AC: 179W; dual AC: 183W

          Operating temperature

          0ºC to 45ºC (32°F to 113°F)

          Operating humidity

          10% RH to 90% RH, non-condensing

          MTBF(Year)

          60.8

          60.2

          63.4

          62.8

          VxLAN

          VXLAN Layer 2 switching

          VXLAN routing switching

          VXLAN gateway

          Centralized VXLAN control through OpenFlow+Netconf

          Virtualization

          Intelligent Resilient Framework 2 (IRF2)

          Distributed device management

          Distributed link aggregation

          Distributed resilient routing

          Stacking through standard Ethernet ports

          Local device stacking and remote device stacking

          LACP-, BFD-, and ARP-based multi-active detection (MAD)

          Link aggregation

          10GE/40GE/100GE port aggregation

          Static aggregation

          Dynamic aggregation

          Jumbo frame

          Supported

          MAC address table

          Max. 256K MAC address entries

          Static MAC address

          Blackhole MAC address

          MAC learning limit

          Openflow

          Openflow1.3.1

          VLAN

          Port-based VLAN (up to 4094 VLANs)

          Default VLAN

          QinQ and flexible QinQ

          VLAN mapping

          PVST+ and RPVST+

          Traffic monitoring

          sFLOW

          DHCP

          DHCP client

          DHCP snooping

          DHCP relay

          DHCP server

          DHCP snooping Option 82/DHCP relay Option 82

          ARP

          Max. 128K ARP

          Static entry

          Gratuitous ARP

          Common proxy ARP and local proxy ARP

          Dynamic ARP inspection

          ARP anti-attack

          ARP source suppression

          ARP detection based on DHCP snooping safety entries, 802.1X entries, and IP/MAC static binding entries

          Routing

          Max. 128K IPV4 routing entries

          Max. 64K IPV6 routing entries

          IPv4/IPv6 static routing

          Dynamic routing such as RIP v1/2 and RIPng

          Policy routing

          Equal-cost multi-path routing (ECMP)

          VRRP

          OSPFv1/v2/v3

          BGP

          IS-IS

          IPv6

          Neighbor Discovery (ND)

          PMTU

          ICMP v6, Telnet v6, SFTP v6, SNMP v6, BFD v6, VRRP v3

          IPv6 Portal

          IPv6 tunnel

          IPV6 SAVI

          Multicast

          IGMP Snooping v2/v3

          IGMP Snooping fast-leave

          IGMP Snooping group-policy

          PIM-SM and PIM-SSM

          PIM snooping

          MVRP

          MFF

          Enhanced Layer 3 multicast

          MPLS

          Support MPLS

          Support MCE

          Support MPLS VPN, VPLS

          Zero configuration

          DHCP auto-config

          CWMP-TR069

          Strom suppression

          Storm suppression based on port bandwidth percentage

          Storm suppression based on PPS

          Storm suppression based on BPS

          Loop-free redundant Layer 2 topology

          STP/RSTP/MSTP

          STP Root Guard

          BPDU Guard

          BPDU Blocking and Root Guard

          Link Detection (UDLD)

          Digital Diagnostic Monitor (DDM)

          Time Domain Reflectometry (TDR)

          G.8032 Ethernet ring protection switching (ERPS)

          QoS/ACL

          Rate limit for receiving and transmitting packets

          CAR

          Eight output queues per port

          Flexible queue scheduling algorithms based on both port and queue, including SP, WDRR, WRR, WFQ, and SP+WRR

          802.1p priority and DSCP priority

          Layer 2 to Layer 4 packet filtering

          Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN

          Time range

          WRED

          Mirroring

          Flow mirroring

          N:4 port mirroring

          Local port mirroring and remote port mirroring

          Policy-based Mirroring

          Traffic Mirroring

          Security

          Hierarchical user management and password protection

          MAC-based authentication

          802.1X

          Storm constrain

          AAA authentication

          RADIUS authentication

          HWTACACS

          SSH2.0

          Port isolation

          IP/Port/MAC binding

          IP source guard

          HTTPs

          SSL

          Public Key Infrastructure (PKI)

          CPU protection

          Loading and upgrading

          Loading and upgrading through XMODEM/FTP/TFTP

          Loading and upgrading from USB

          Management and maintenance

          Configuration from CLI

          Login through Telnet, and the console port

          Job scheduler

          ISSU

          802.1ag and 802.3ah

          Simple Network Management Protocol (SNMP)

          IMC network management system

          System log

          Alarming based on severity

          NTP

          Power, fan, and temperature alarming

          Debugging information output

          Ping and Tracert

          Track

          Telnet-based remote maintenance

          EMC

          FCC Part 15 Subpart B CLASS A

          ICES-003 CLASS A

          VCCI CLASS A

          CISPR 32 CLASS A

          EN 55032 CLASS A

          AS/NZS CISPR32 CLASS A

          CISPR 24

          EN 55024

          EN 61000-3-2

          EN 61000-3-3

          GB/T 9254

          YD/T 993

          Safety

          UL 60950-1

          CAN/CSA C22.2 No 60950-1

          IEC 60950-1

          EN 60950-1

          AS/NZS 60950-1

          FDA 21 CFR Subchapter J

          GB 4943.1

          Product ID

          Product Description

          LS-6520X-30QC-HI-GL

          H3C S6520X-30QC-HI L3 Ethernet Switch(24SFP Plus+2QSFP Plus+2Slot),No Power

          LS-6520X-54QC-HI-GL

          H3C S6520X-54QC-HI L3 Ethernet Switch(48SFP Plus+2QSFP Plus+2Slot),No Power

          LS-6520X-30HC-HI-GL

          H3C S6520X-30HC-HI L3 Ethernet Switch(24SFP Plus+2QSFP28+2Slot),No Power

          LS-6520X-54HC-HI-GL

          H3C S6520X-54HC-HI L3 Ethernet Switch(48SFP Plus+2QSFP28+2Slot),No Power

          Fan

          LSWM1FANSCE

          Ethernet Switch Fan Module(Power to Port Airflow)

          LSWM1FANSCBE

          Ethernet Switch Fan Module(Port to Power Airflow)

          Power supply

          PSR250-12A-GL

          250W AC Power Supply Module

          PSR250-12A1-GL

          250W AC Power Supply Module

          Modules

          LSWM2QP2P

          2-Port 40G QSFP Plus Interface Card

          LSWM2SP8P

          8-Port 10G SFP Plus Interface Card

          LSWM4SP8PM

          8-Port 10G SFP Plus with MACSec Interface Module

          LSWM2ZSP8P

          8-Port 25G SFP28 Interface Module

          LSWM2ZQP2P

          2-Port 100G QSFP28 Interface Module

          Wireless license

          LIS-WX-128-BE

          Enhanced Access Controller License,128 APs

          LIS-WX-32-BE

          Enhanced Access Controller License,32 APs

          LIS-WX-16-BE

          Enhanced Access Controller License,16 APs

          LIS-WX-8-BE

          Enhanced Access Controller License,8 APs

          LIS-WX-1-BE

          Enhanced Access Controller License,1 AP

          Transceivers

          SFP-GE-SX-MM850-A

          1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)

          SFP-GE-LX-SM1310-A

          1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)

          SFP-GE-LH40-SM1310

          1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)

          SFP-GE-LH40-SM1550

          1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)

          SFP-GE-LH80-SM1550

          1000BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)

          SFP-GE-LH100-SM1550

          1000BASE-LH100 SFP Transceiver, Single Mode (1550nm, 100km, LC)

          SFP-GE-LX-SM1310-BIDI

          1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1490, 10km, LC)

          SFP-GE-LX-SM1490-BIDI

          1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1490/RX1310, 10km, LC)

          SFP-GE-T

          1000BASE-T SFP

          SFP-XG-LH40-SM1550

          SFP+ Module(1550nm,40km,LC)

          SFP-XG-LX-SM1310-E

          SFP+ Module(1310nm,10km,LC)

          SFP-XG-SX-MM850-E

          SFP+ Module(850nm,300m,LC)

          SFP-25G-SR-MM850

          25G SFP28 Optical Transceiver Module (850nm,100m,SR,MM,LC)

          QSFP-40G-LR4-WDM1300

          40GBASE-LR4 QSFP+ Optical Transceiver Module

          QSFP-40G-CSR4-MM850

          QSFP+ 40GBASE Optical Transceiver Module (850nm,300m,CSR4,Support 40G to 4*10G)

          QSFP-40G-SR4-MM850

          QSFP+ 40GBASE Optical Transceiver Module (850nm,100m,SR4,Support 40G to 4*10G)

          QSFP-100G-SR4-MM850

          100G QSFP28 Optical Transceiver Module (850nm,100m OM4,SR4,MPO)

          QSFP-100G-LR4-WDM1300

          100G QSFP28 Optical Transceiver Module(1310nm,10km,LR4,WDM,LC)

          QSFP-100G-LR4L-WDM1300

          100G QSFP28 Optical Transceiver Module (1310nm,2km,LR4L,CWDM4,LC)

          Cables

          CAB-CON-1.8m

          Single Cable,Console Serial Port Cable,1.8m,D9F,28UL20276(4P)(P296U),MPH-8P8C

          LSWM1STK

          SFP+ Cable 0.65m

          LSWM2STK

          SFP+ Cable 1.2m

          LSWM3STK

          SFP+ Cable 3m

          SFP-25G-D-CAB-1M

          25G SFP28 to 25G SFP28 1m Passive Cable

          SFP-25G-D-CAB-3M

          25G SFP28 to 25G SFP28 3m Passive Cable

          SFP-25G-D-CAB-5M

          25G SFP28 to 25G SFP28 5m Passive Cable

          LSWM1QSTK0

          40G QSFP+ Cable 1m

          LSWM1QSTK1

          40G QSFP+ Cable 3m

          LSWM1QSTK2

          40G QSFP+ Cable 5m

          LSWM1QSTK3

          40G QSFP+ to 4x10G SFP+ Cable 1m

          LSWM1QSTK4

          40G QSFP+ to 4x10G SFP+ Cable 3m

          LSWM1QSTK5

          40G QSFP+ to 4x10G SFP+ Cable 5m

          QSFP-100G-D-CAB-1M

          100G QSFP28 to 100G QSFP28 1m Passive Cable

          QSFP-100G-D-CAB-3M

          100G QSFP28 to 100G QSFP28 3m Passive Cable

          QSFP-100G-D-CAB-5M

          100G QSFP28 to 100G QSFP28 5m Passive Cable

          QSFP-100G-4SFP-25G-CAB-1M

          100G QSFP28 to 4x25G SFP28 1m Passive Cable

          QSFP-100G-4SFP-25G-CAB-3M

          100G QSFP28 to 4x25G SFP28 3m Passive Cable

          QSFP-100G-4SFP-25G-CAB-5M

          100G QSFP28 to 4x25G SFP28 5m Passive Cable

          QSFP-100G-D-AOC-7M

          100G QSFP28 to 100G QSFP28 7m Active Optical Cable

          QSFP-100G-D-AOC-10M

          100G QSFP28 to 100G QSFP28 10m Active Optical Cable

          QSFP-100G-D-AOC-20M

          100G QSFP28 to 100G QSFP28 20m Active Optical Cable

          OP-MPO8-8LC-10-M

          Fiber Connector,MPO(8 core)/PC,8LC/PC(0.5m),Multimode(OM3),3.0mm,10.0m

          OP-MPO8-MPO8-10-M

          Fiber connector,MPO(8 core)/PC,MPO(8 core)/PC,Multimode(OM3),3.0mm,10.0m

          OP-MPO8-MPO8-50-M

          Fiber connector,MPO(8 core)/PC,MPO(8 core)/PC,Multimode(OM3),3.0mm,50.0m

          OP-MPO8-MPO8-100-M

          Fiber connector,MPO(8 core)/PC,MPO(8 core)/PC,Multimode(OM3),3.0mm,100.0m

          OP-MPO8-MPO8-200-M

          Fiber connector,MPO(8 core)/PC,MPO(8 core)/PC,Multimode(OM3),3.0mm,200.0m

          Are you an H3C partner? Log in to see additional resources.
          You can find excellent H3C partners, or you can become one of them to build a
          partnership with H3C and share success together.

                  游戏网赚